home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Netware Super Library
/
Netware Super Library.iso
/
nov_info
/
fyi7
/
06182.dos
< prev
next >
Wrap
Text File
|
1990-06-18
|
3KB
|
60 lines
TECHNICAL BULLETIN
Bulletin #1-269
Date: April 27, 1990
Error in 3Com Installation Supplement
The addendum to the NetWare Installation Supplement for 3Com
Etherlink and Etherlink Plus (revision 1.00, P/N 101-385-001)
contains erroneous information. Specifically, the configuration
option table (Figure 2) is incorrect for every option. The correct
configuration option information for DOS is listed below.
3Com 3C503 EtherLink II
0. I/O = 300h, INT = 3, DMA = 1, BNC
1. I/O = 310h, INT = 2, DMA = 3, BNC
2. I/O = 330h, INT = 4, RAM = C8000, BNC
3. I/O = 350h, INT = 5, RAM = CC000, BNC
4. I/O = 250h, INT = 3, RAM = D8000, BNC
5. I/O = 280h, INT = 2, RAM = DC000, BNC
6. I/O = 2A0h, INT = 4, DMA = 1, BNC
7. I/O = 2E0h, INT = 5, DMA = 3, BNC
8. I/O = 300h, INT = 3, RAM = C8000, BNC
9. I/O = 310h, INT = 2, RAM = CC000, BNC
10. I/O = 330h, INT = 4, RAM = D8000, BNC
11. I/O = 350h, INT = 5, RAM = DC000, BNC
12. I/O = 250h, INT = 3, DMA = 1, BNC
13. I/O = 280h, INT = 2, DMA = 3, BNC
14. I/O = 2A0h, INT = 4, RAM = C8000, BNC
15. I/O = 2E0h, INT = 5, RAM = CC000, BNC
16. I/O = 300h, INT = 3, DMA = 1, DIX
17. I/O = 310h, INT = 2, DMA = 3, DIX
18. I/O = 330h, INT = 4, RAM = C8000, DIX
19. I/O = 350h, INT = 5, RAM = CC000, DIX
20. I/O = 250h, INT = 3, RAM = D8000, DIX
21. I/O = 280h, INT = 2, RAM = DC000, DIX
22. I/O = 2A0h, INT = 4, DMA = 1, DIX
23. I/O = 2E0h, INT = 5, DMA = 3, DIX
24. I/O = 300h, INT = 3, RAM = C8000, DIX
25. I/O = 310h, INT = 2, RAM = CC000, DIX
26. I/O = 330h, INT = 4, RAM = D8000, DIX
27. I/O = 350h, INT = 5, RAM = DC000, DIX
28. I/O = 250h, INT = 3, DMA = 1, DIX
29. I/O = 280h, INT = 2, DMA = 3, DIX
30. I/O = 2A0h, INT = 4, RAM = C8000, DIX
31. I/O = 2E0h, INT = 5, RAM = CC000, DIX
Although the supplement is incorrect, the correct options are
displayed when choosing the configuration in SHGEN under DOS.
However, when the Multiple Link Interface Drivers (MLID) are
installed as device drivers under OS/2, the configuration options
are not displayed. The default configuration for OS/2 is:
I/O = 300h, INT = 3, RAM = C8000, BNC
Note that the Base Memory Address may not be set to "Disabled" when
running the 3C503 board with the NetWare Requester for OS/2. See
the NetWare Requester for OS/2 Supplement for additional
information on reconfiguring the NetWare Requester.